Cisco 010-151 Deluxe Study Guide with Online Test Engine
010-151 dumps review - Professional Quiz Study Materials
NEW QUESTION # 96
DRAG DROP
Answer:
Explanation:
NEW QUESTION # 97
Which NX-OS command is used to display the boot variable configuration?
- A. open boot
- B. show boot
- C. show config
- D. display boot
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fundamentals/ command/reference/fnd_cmd/fnd_commands.html
NEW QUESTION # 98
What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?
- A. 80 km
- B. 10 km
- C. 550 m
- D. 40 km
Answer: B
NEW QUESTION # 99
Which two statements about FCoE are true? (Choose two.)
- A. Consolidates I/O traffic in the data center.
- B. Increases capital costs due to the difficulty to manage.
- C. It allows Ethernet traffic to run over a Fibre Channel infrastructure.
- D. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
- E. Encapsulates Ethernet frames into Fibre Channel frames, which allows them to run alongside traditional IP traffic.
Answer: A,D
NEW QUESTION # 100 
Refer to the exhibit. Which item does 3 represent?
- A. Operate as dedicated 40-Gbps, QSFP+ uplink ports.
- B. Operate as 40-Gbps QSFP+ ports or as 4 x 10-Gbps SFP+ breakout ports
- C. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
- D. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/6300-install- guide/6300_Series_HIG/6300_Series_HIG_chapter_01.html
NEW QUESTION # 101
Up to what speed can Category 5e UTP cable transmit data?
- A. 1000 Mb/s
- B. 10 Mb/s
- C. 100 Mb/s
- D. 10000 Mb/s
Answer: A
NEW QUESTION # 102
What does the IEEE 802.3 standard define?
- A. the signal strength of wireless networks
- B. the physical layer of wired Ethernet
- C. the application layer of wired networks
- D. the physical layer of wireless networks
Answer: B
NEW QUESTION # 103
Refer to the exhibit.
Which item does C represent?
- A. Favorite Icon (make any specific work pane in the application as your favorite)
- B. Index Icon (view listing in alphabetical order)
- C. Pin icon (prevents Navigation pane from sliding)
- D. Icon to view the Navigation pane
Answer: A
NEW QUESTION # 104
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. E - Fabric Interconnects A - PSUs
- B. D - Rack-Mounts - Servers
- C. B - Chassis 1 - PSUs
- D. A - Chassis 1
- E. C - Chassis1 - Servers
Answer: C
NEW QUESTION # 105
Refer to the exhibit.
Where is the best place to see bootflash free space?
- A. C - Local Storage Information
- B. A - Available Memory
- C. B - Total Memory
- D. D - High Availability Details
Answer: A
NEW QUESTION # 106
Refer to the exhibit.
Where is the best place to see bootflash free space?
- A. C - Local Storage Information
- B. A - Available Memory
- C. B - Total Memory
- D. D - High Availability Details
Answer: A
NEW QUESTION # 107 
Refer to the exhibit. Which item does F represent?
- A. SuperCap Module
- B. TFP Module
- C. HDD 1
- D. CPU 2
- E. CMOS Battery
Answer: D
NEW QUESTION # 108
Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#
- A. Cisco IOS mode
- B. global configuration mode
- C. maintenance mode
- D. EXEC mode
- E. local management mode
Answer: D
NEW QUESTION # 109
Refer to the exhibit.
Which statement correctly identifies the hardware features on the Cisco Nexus 9500 Series supervisor A modules?
- A. A is Console port; B is USB port; C is 10/100/1000 Management port; D is external clock input
- B. A is Console port; B is USB port; C is 10/100/1000 Management port; D is Diagnostic port
- C. A is 10/100/1000 Management port; B is USB port; C is Console port; D is external clock input
- D. A is Optical port; B is USB port; C is 10/100/1000 Management port; D is external clock input
Answer: A
NEW QUESTION # 110
Which fiber optic cable type is used most often with a Subscriber connector?
- A. subscriber-mode
- B. straight-mode
- C. dual-mode
- D. multi-mode
- E. single-mode
Answer: E
NEW QUESTION # 111
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. E - Fabric Interconnects A - PSUs
- B. D - Rack-Mounts - Servers
- C. B - Chassis 1 - PSUs
- D. A - Chassis 1
- E. C - Chassis1 - Servers
Answer: C
NEW QUESTION # 112
Which action should the administrator take before physically removing a blade server for maintenance or replacement?
- A. Perform a graceful shutdown of the server.
- B. Disassociate the service profile.
- C. Decommission the server.
- D. Force the server to shut down.
Answer: C
NEW QUESTION # 113
When a host firmware package policy is created, what must it be associated with to upgrade the BIOS?
- A. boot policy
- B. service template
- C. service profile
- D. blade or blade pool
Answer: C
NEW QUESTION # 114
Which PCle slot is the default for the rear RAID controller when the rear drive module is used with SAS/SATA drives in Cisco UCS C480 M5 sever?
- A. PCle slot 12
- B. PCle slot 11
- C. PCle slot 10
- D. PCle slot 09
Answer: B
NEW QUESTION # 115
Refer to the exhibit.
Which item does 3 represent?
- A. Operate as 40-Gbps QSFP+ ports or as 4 * 10-Gbps SFP+ breakout ports
- B. Operate as dedicated 40-Gbps, QSFP+ uplink ports.
- C. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
- D. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
Answer: B
NEW QUESTION # 116
Refer to the exhibit.
Which three options are features of the Cisco UCS 6248UP Fabric Interconnect front panel? (Choose three.)
- A. Fan module
- B. 10 Gb/s port
- C. Console port
- D. FCoE port
- E. USB port
Answer: A,C,E
NEW QUESTION # 117
......
To prepare for the exam, candidates can enroll in the Supporting Cisco Datacenter Networking Devices (DCTECH) course, which provides them with the necessary knowledge and skills to pass the exam. 010-151 course covers topics such as troubleshooting Cisco data center infrastructure, identifying Cisco equipment and related hardware, and using Cisco IOS and NX-OS command-line interface (CLI) commands.
Exam Questions Answers Braindumps 010-151 Exam Dumps PDF Questions: https://examsboost.pass4training.com/010-151-test-questions.html
