Verified JN0-103 Dumps Q&As - JN0-103 Test Engine with Correct Answers [Q78-Q102]

Share

Verified JN0-103 Dumps Q&As - JN0-103 Test Engine with Correct Answers

Pass Your JN0-103 Dumps as PDF Updated on 2022 With 141 Questions


How much Juniper JN0-103: Junos, Associate (JNCIA-Junos) Exam Cost

The price of the JN0-103 exam is $200 USD, for more information please visit official website as the prices varies on the basis of different currencies.


Difficulty in writing Juniper JN0-103: Junos, Associate (JNCIA-Junos) Exam

Juniper JN0-103 Exam certification exam has a higher rank in the IT sector. Candidate can add a most powerful Juniper Certified Expert certification on their resume by passing Juniper JN0-103 exam. JN0-103 is a very challenging exam Candidate will have to work hard to pass this exam. With the help of Pass4training provided the right focus and preparation material passing this exam is an achievable goal. Pass4training provide the most relevant and updated Juniper JN0-103 exam dumps. Furthermore, We also provide the JN0-103 practice test that will be much beneficial in the preparation. Our aims to provide the best Juniper JN0-103 pdf exam dumps. We are providing all useful preparation materials such as Juniper JN0-103 exam dumps that had been verified by the Juniper experts, JN0-103 exam dumps and customer care service in case of any problem. These are things are very helpful in passing the exam with good grades.

 

NEW QUESTION 78
Which type of route does the configuration create?

  • A. an indirect next hop
  • B. a non-advertised route
  • C. a generated route
  • D. a default gateway

Answer: D

 

NEW QUESTION 79
You are in configuration mode at the top of the hierarchy. How would you save your configuration to a file on the router?

  • A. save <filename>
  • B. save config <filename>
  • C. save configuration <filename>
  • D. save run <filename>

Answer: A

 

NEW QUESTION 80

Which next-hop interface will be used to reach the 10.21.14.16 destination as shown in the exhibit?

  • A. ge-0/0/2.0
  • B. ge-0/0/3.0
  • C. ge-0/0/0.0
  • D. ge-0/0/1.0

Answer: D

Explanation:
Explanation/Reference:

 

NEW QUESTION 81
Click the Exhibit button.

Referring to the exhibit, which action would synchronize the local router's clock with the NTP server?

  • A. Configure the NTP server using the set boot-server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
  • B. Reboot the router.
  • C. Issue the set date ntp operational command.
  • D. Configure the correct NTP trusted key using the net trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.

Answer: C

 

NEW QUESTION 82
Referring to the exhibit, what does the number inside the square brackets represent?

  • A. protocol reference number
  • B. route preference
  • C. metric
  • D. local preference

Answer: C

 

NEW QUESTION 83
Exhibit:
***Exhibit is Missing***
Which statement is correct when traffic is received from 10.10.10.4?

  • A. The traffic is only rejected
  • B. The traffic is only accepted
  • C. The traffic is counted and rejected
  • D. The traffic is counted and accepted

Answer: C

 

NEW QUESTION 84
Which statement is true about the longerroute-filter match type?

  • A. All routes within the specified prefix that are longer than or equal to the given prefix are considered a match.
  • B. All routes within the specified prefix that are longer than the given prefix are considered a match.
  • C. All routes within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match.
  • D. All routes within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match.

Answer: B

 

NEW QUESTION 85
You are connected to your Junos device using an SSH connection to the fxp0 interface. No other interface are currently configured beyond their default setting. You commit a configuration that makes the fxp0 interface unreachable from your management network. In this scenario, how would you re-establish communication with the device?

  • A. Connect to the console of the device.
  • B. Unplug the network cable and plug it back in.
  • C. Establish an SSH connection to the loopback interface.
  • D. Power off and power on the device.

Answer: A

 

NEW QUESTION 86
Which two statements describe PFE functions?

  • A. The PFE provides access to the CLI and Jweb
  • B. The PFE stores the master copy of the layer 2 and layer 3 forwarding tables
  • C. The PFE stores a local copy of the layer 2 and layer 3 forwarding tables
  • D. The PFE implements rate limiting using policers

Answer: C,D

 

NEW QUESTION 87
Which two interfaces are considered logical interfaces? (Choose two.)

  • A. ge-2/0/2.0
  • B. xe-1/1/1
  • C. ae1.1
  • D. et-5/0/0

Answer: C,D

 

NEW QUESTION 88
Which two features are implemented on the Packet Forwarding Engine? (Choose Two)

  • A. Firewall Filters
  • B. Class of Service
  • C. Chassis Management
  • D. Routing protocol update

Answer: A,B

 

NEW QUESTION 89
Referring to the exhibit,

which command will cause this event message?

  • A. request system recover
  • B. request system halt
  • C. request system commit
  • D. request system logout

Answer: D

 

NEW QUESTION 90

Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to 172.16.100.1/24 IP address?

  • A. insert interface ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address
    172.16.100.1/24
  • B. set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
  • C. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
  • D. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address
    172.16.100.1/24

Answer: D

Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/rename.html

 

NEW QUESTION 91
Referring to the exhibit,

what happens when ping packets are sent to management interface address of the local router?

  • A. An ICMP unreachable message is returned
  • B. The Ping packets are accepted
  • C. An ICMP redirect message is returned
  • D. The ping packets are silently discarded

Answer: C

 

NEW QUESTION 92

Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. The memory utilization is 72%.
  • B. The memory utilization is 28%.
  • C. The 15 minute CPU load average is 99%.
  • D. The CPU kernel utilization is 1%.

Answer: B,D

 

NEW QUESTION 93
Which two commands would you use to reset the candidate configuration to the active configuration?
(Choose two.)

  • A. rollback 0
  • B. rollback 2
  • C. rollback 1
  • D. rollback

Answer: A,D

 

NEW QUESTION 94
What is the purpose of the load mergecommand?

  • A. to combine the current configuration with the configuration you load
  • B. to look for a replace tag in the configuration you load
  • C. to add or delete variables from the configuration based on the contents of a specified patch file
  • D. to completely overwrite the current configuration with the configuration you load

Answer: A

 

NEW QUESTION 95
What are two examples of transit traffic? (Choose two.)

  • A. SCP traffic that enters one interface and exits another interface on the local router.
  • B. SFTP traffic that enters and exits the same interface on the local router.
  • C. SCP traffic that is destined for the router's loopback interface.
  • D. SFTP traffic that enters one interface and is destined for another interface on the local router.

Answer: A,B

 

NEW QUESTION 96
Which command displays the output shown in the exhibit?
***Exhibit is Missing***

  • A. show chassis environment
  • B. show chassis temperature-thresholds
  • C. show chassis alarms
  • D. show chassis hardware

Answer: A

 

NEW QUESTION 97
Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to 172.16.100.1/24 IP address?

  • A. insert interface ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address
    172.16.100.1/24
  • B. set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
  • C. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
  • D. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address
    172.16.100.1/24

Answer: D

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/rename.html

 

NEW QUESTION 98
What are two benefits realized by the disaggregated Junos? (Choose two.)

  • A. There is increased flexibility to use different control plane versions.
  • B. The architecture facilitates programmability through provisioning the control plane, the data path, and the platform API's.
  • C. The platform drivers and forwarding engineer are removed from the control plane to increase performance.
  • D. The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.

Answer: B,C

 

NEW QUESTION 99
Which configuration parameter on a Junos device modifies the default next-hop resolution behavior of a static route?

  • A. no-readvertise
  • B. preference
  • C. passive
  • D. resolve

Answer: D

 

NEW QUESTION 100
How does the PFE determine how to forward transit traffic?

  • A. The PFE determines network destinations itself based on the RE's routing table.
  • B. The PFE performs a destination lookup based on its own routing table.
  • C. The PFE uses the forwarding table provided by the RE.
  • D. The PFE uses the routing table provided by the RE.

Answer: C

 

NEW QUESTION 101
What is minimum configuration required for a Junos device to respond to SNMP requests?

  • A. set snmp community public authorization read only
  • B. set snmp community public
  • C. set snmp trap-group public version v1
  • D. set snmp public version v2

Answer: B

 

NEW QUESTION 102
......


Juniper JN0-103 Practice Test Questions, Juniper JN0-103 Exam Practice Test Questions

Taking the Juniper JN0-103 exam is the main requirement for getting the Juniper Networks Certified Associate (JNCIA-Junos) certification. This is an associate-level certificate, which is the first stage within the Data Center track of the Juniper Networks Certification Program (JNCP). This path enables the professionals to validate their competency in advanced data center technologies as well as associated configuration and troubleshooting skills. The successful candidates have a solid knowledge of Junos OS utilized in a data center environment.

 

Pass Juniper JN0-103 Exam Info and Free Practice Test: https://examsboost.pass4training.com/JN0-103-test-questions.html