Latest EMC D-PDC-DY-23 Practice Test Questions, Dell PowerSwitch Data Center Deploy 2023 Exam Dumps
Oct-2024 Pass EMC D-PDC-DY-23 Exam in First Attempt Easily
NEW QUESTION # 71
What is one of the configuration requirements for VLT on OS10?
- A. Configure a port channel for VLTi
- B. Create a VLT domain on each peer using the vlt-domain command.
- C. Manually reconfigure the VLT MAC address. Configure the VLT MAC address on both VLT peers.
- D. Configure a time interval to delay bringing up VLT ports after reload when the VLTi is turned on after failure.
Answer: B
NEW QUESTION # 72
What is the purpose of the VLT backup link?
- A. To monitor the availability of the VLT peer if there is a VLTi failure.
- B. To monitor the VLT internal control VLAN on the VLT peer if there is a VLTi failure.
- C. To synchronize ARP entries between VLT peers if there is a VLTi failure.
- D. To synchronize MAC address tables bel ween VLT peers if there is a VLTi failure.
Answer: D
NEW QUESTION # 73
When implementing the VRRP tracking feature, what is the default priority exist of a tracked interface?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 74
In a VRRP configured environment without VLT, how does the backup VRRP peer respond to ARP requests?
- A. Does not respond to ARP requests
- B. Sends an ICMP redirect message
- C. Responds to ARP requests with the MAC address of the master peer's IP
- D. Responds to ARP requests with the MAC address of the virtual IP address
Answer: A
NEW QUESTION # 75
What is an attribute of OS10 Enterprise Edition?
- A. No license needed
- B. Free download
- C. Includes full programmability
- D. Provides a GUI
Answer: C
NEW QUESTION # 76
What is an advantage of running LLDP?
- A. Automatic error detection and correction of the port
- B. Reduces spanning-tree convergence
- C. Provides detailed software version information
- D. Simplifies the use of network management
Answer: D
NEW QUESTION # 77
On what does PBR base routing decisions?
- A. Batch traffic
- B. Dijkstra Algorithm
- C. Administrator-defined forwarding
- D. Shortest path
Answer: C
NEW QUESTION # 78
Match the OSPF router types.
There are more descriptions than router types.
Answer:
Explanation:
NEW QUESTION # 79
A network administrator is deploying a Leaf-Spine fabric using eBGP private AS.
Why should the network administrator assign a unique AS number to each VLT peer in the VLT domain?
- A. To reduce the number of hops
- B. To assist with load balancing
- C. To minimize the needed compute and memory resources
- D. To avoid the need to configure multi-exit discriminators
Answer: D
NEW QUESTION # 80
What do bridge protocol data units provide?
- A. Configuration data exchanged during a VLTi setup
- B. Metadata transferred connecting two network bridges
- C. Special data frames to exchange STP information
- D. Bridge information part of the LLDP protocol
Answer: C
NEW QUESTION # 81
Two Dell Networking OS10 switches in a VLT configuration must be upgraded.
How will the reload of these switches proceed to result in the default initial state?
- A. Reload the primary VLT node and wait for it to join as secondary.
Wait until after delay restore timer has expired.
Reload VLT secondary node and wait for it to join as secondary. - B. Reload the primary VLT node and wait for it to join as primary.
Wait until after delay restore timer has expired.
Reload VLT secondary node and wait for it to join as secondary. - C. Reload the primary VLT node.
This process will automatically trigger the reload of the secondary node after it has recovered. - D. Reload the primary VLT node.
This will automatically trigger the simultaneous reload of the secondary node.
Answer: A
NEW QUESTION # 82
In a Layer 3 Leaf-Spine topology what can be used to move Layer 2 traffic between racks?
- A. Port channel
- B. Trunks
- C. VLT
- D. VXLAN
Answer: D
NEW QUESTION # 83
Refer to the exhibit.
Which configuration will allow S1 to ping S2's Lo0 address?
- A. S1(config)# ip route 144.254.32.1/32 192.168.32.2
- B. S1(config)# ip route 192.168.32.2 144.254.32.1/32
- C. S1(config-router)# ip route 192.168.32.2 144.254.32.1/32
- D. S1(config-router)# ip route 144.254.32.1 192.168.32.2/32
Answer: A
NEW QUESTION # 84
Which OSPF router is responsible for originating Network Link State Advertisements?
- A. Designated Router
- B. Area Border Router
- C. Backbone Router
- D. Internal Router
Answer: A
NEW QUESTION # 85
What must be done before configuring any routing protocol in a VRF instance?
- A. Nothing, VRF routing protocols are assigned automatically
- B. Create a routing group for each VRF instance
- C. Assign each VRF instance to a routing group
- D. Assign an IP address to at least one of the interfaces assigned to the VRF instance
Answer: D
NEW QUESTION # 86
What does the command aaa authentication login default group radius local do?
- A. First, a RADUIS server authenticates the users.
If the server fails to respond, a remote router database is used. - B. First, the router local database authenticates the users.
If it fails to respond, a RADUIS server authenticates the users. - C. First, a RADUIS server authenticates the users.
If the credentials are incorrect, the local router database is used. - D. First, a RADIUS server authenticates the users.
If the server fails to respond, the local router database is used.
Answer: D
NEW QUESTION # 87
What are the default STP settings in OS10?
- A. Roat-Guard: Enabled: BPDU-Guard: Enabled
- B. Root-Guard: Disabled: BPDU-Guard: Disabled
- C. Root-Guard: Disabled: BPDU-Guard: Enabled
- D. Root-Guard: Enabled: BPDU-Guard: Disabled
Answer: B
NEW QUESTION # 88
What benefit does VRRP version 3 provide over VRRP version 2 in OS10?
- A. Allows multiple masters in the topology.
- B. Allows subsecond timers.
- C. Provides preemption capability.
- D. Provides MD5 authentication.
Answer: B
NEW QUESTION # 89
What is the size of the VLAN tag in an Ethernet frame?
- A. 1 byte
- B. 8 bytes
- C. 4 bytes
- D. 2 bytes
Answer: C
NEW QUESTION # 90
According to Dell best practices, what is the recommended role for Z-Series switches?
- A. Spins switches
- B. Access switches
- C. Top-of-Rack switches
- D. Leaf switches
Answer: C
NEW QUESTION # 91
Which two steps are required when configuring ports to operate in a VLT port channel? (Select 2)
- A. Configure the channel-group member under the physical interface.
- B. Configure the physical interface as a VLT port channel.
- C. Configure the channel-group member under the port channel interface.
- D. Configure the port channel interface as a VLT port channel.
Answer: A,D
NEW QUESTION # 92
......
Free D-PDC-DY-23 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://examsboost.pass4training.com/D-PDC-DY-23-test-questions.html
