[Jan-2026] Verified SPLK-4001 dumps Q&As - SPLK-4001 dumps with Correct Answers
The Best Splunk O11y Cloud Certified Study Guide for the SPLK-4001 Exam
Upon successfully completing the Splunk SPLK-4001 certification exam, candidates will receive a Splunk O11y Cloud Certified Metrics User certification, which is recognized internationally as an industry-standard credential. Splunk O11y Cloud Certified Metrics User certification program will help validate the candidate’s knowledge, skills, and experience in the area of cloud monitoring and analytics, which will ultimately enhance their career prospects and enable them to build a successful career in this exciting field.
NEW QUESTION # 17
A customer has a large population of servers. They want to identify the servers where utilization has increased the most since last week. Which analytics function is needed to achieve this?
- A. Standard deviation
- B. Sum transformation
- C. Tlmeshift
- D. Rate
Answer: C
Explanation:
The correct answer is C. Timeshift.
According to the Splunk Observability Cloud documentation1, timeshift is an analytic function that allows you to compare the current value of a metric with its value at a previous time interval, such as an hour ago or a week ago. You can use the timeshift function to measure the change in a metric over time and identify trends, anomalies, or patterns. For example, to identify the servers where utilization has increased the most since last week, you can use the following SignalFlow code:
timeshift(1w, counters("server.utilization"))
This will return the value of the server.utilization counter metric for each server one week ago. You can then subtract this value from the current value of the same metric to get the difference in utilization. You can also use a chart to visualize the results and sort them by the highest difference in utilization.
NEW QUESTION # 18
Which of the following are ways to reduce flapping of a detector? (select all that apply)
- A. Configure a duration or percent of duration for the alert.
- B. Establish a reset threshold for the detector.
- C. Enable the anti-flap setting in the detector options menu.
- D. Apply a smoothing transformation (like a rolling mean) to the input data for the detector.
Answer: A,D
Explanation:
Explanation
According to the Splunk Lantern article Resolving flapping detectors in Splunk Infrastructure Monitoring, flapping is a phenomenon where alerts fire and clear repeatedly in a short period of time, due to the signal fluctuating around the threshold value. To reduce flapping, the article suggests the following ways:
Configure a duration or percent of duration for the alert: This means that you require the signal to stay above or below the threshold for a certain amount of time or percentage of time before triggering an alert. This can help filter out noise and focus on more persistent issues.
Apply a smoothing transformation (like a rolling mean) to the input data for the detector: This means that you replace the original signal with the average of its last several values, where you can specify the window length. This can reduce the impact of a single extreme observation and make the signal less fluctuating.
NEW QUESTION # 19
The Sum Aggregation option for analytic functions does which of the following?
- A. Calculates the sum of values present in the input time series across the entire environment or per group.
- B. Calculates the number of MTS present in the plot.
- C. Calculates the sum of values per time series across a period of time.
- D. Calculates 1/2 of the values present in the input time series.
Answer: A
Explanation:
Explanation
According to the Splunk Test Blueprint - O11y Cloud Metrics User document1, one of the metrics concepts that is covered in the exam is analytic functions. Analytic functions are mathematical operations that can be applied to metrics to transform, aggregate, or analyze them.
The Splunk O11y Cloud Certified Metrics User Track document2 states that one of the recommended courses for preparing for the exam is Introduction to Splunk Infrastructure Monitoring, which covers the basics of metrics monitoring and visualization.
In the Introduction to Splunk Infrastructure Monitoring course, there is a section on Analytic Functions, which explains that analytic functions can be used to perform calculations on metrics, such as sum, average, min, max, count, etc. The document also provides examples of how to use analytic functions in charts and dashboards.
One of the analytic functions that can be used is Sum Aggregation, which calculates the sum of values present in the input time series across the entire environment or per group. The document gives an example of how to use Sum Aggregation to calculate the total CPU usage across all hosts in a group by using the following syntax:
sum(cpu.utilization) by hostgroup
NEW QUESTION # 20
A customer is experiencing issues getting metrics from a new receiver they have configured in the OpenTelemetry Collector. How would the customer go about troubleshooting further with the logging exporter?
- A. Adding debug into the metrics exporter pipeline:
- B. Adding logging into the metrics receiver pipeline:
- C. Adding debug into the metrics receiver pipeline:
- D. Adding logging into the metrics exporter pipeline:
Answer: B
Explanation:
Explanation
The correct answer is B. Adding logging into the metrics receiver pipeline.
The logging exporter is a component that allows the OpenTelemetry Collector to send traces, metrics, and logs directly to the console. It can be used to diagnose and troubleshoot issues with telemetry received and processed by the Collector, or to obtain samples for other purposes1 To activate the logging exporter, you need to add it to the pipeline that you want to diagnose. In this case, since you are experiencing issues with a new receiver for metrics, you need to add the logging exporter to the metrics receiver pipeline. This will create a new plot that shows the metrics received by the Collector and any errors or warnings that might occur1 The image that you have sent with your question shows how to add the logging exporter to the metrics receiver pipeline. You can see that the exporters section of the metrics pipeline includes logging as one of the options.
This means that the metrics received by any of the receivers listed in the receivers section will be sent to the logging exporter as well as to any other exporters listed2 To learn more about how to use the logging exporter in Splunk Observability Cloud, you can refer to this documentation1.
1: https://docs.splunk.com/Observability/gdi/opentelemetry/components/logging-exporter.html 2:
https://docs.splunk.com/Observability/gdi/opentelemetry/exposed-endpoints.html
NEW QUESTION # 21
A customer wants to share a collection of charts with their entire SRE organization. What feature of Splunk Observability Cloud makes this possible?
- A. Dashboard groups
- B. Chart exporter
- C. Public dashboards
- D. Shared charts
Answer: A
Explanation:
Explanation
According to the web search results, dashboard groups are a feature of Splunk Observability Cloud that allows you to organize and share dashboards with other users in your organization1. You can create dashboard groups based on different criteria, such as service, team, role, or topic. You can also set permissions for each dashboard group, such as who can view, edit, or manage the dashboards in the group. Dashboard groups make it possible to share a collection of charts with your entire SRE organization, or any other group of users that you want to collaborate with.
NEW QUESTION # 22
When installing OpenTelemetry Collector, which error message is indicative that there is a misconfigured realm or access token?
- A. 503 (SERVICE UNREACHABLE)
- B. 404 (NOT FOUND)
- C. 401 (UNAUTHORIZED)
- D. 403 (NOT ALLOWED)
Answer: C
Explanation:
Explanation
The correct answer is C. 401 (UNAUTHORIZED).
According to the web search results, a 401 (UNAUTHORIZED) error message is indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector1. A 401 (UNAUTHORIZED) error message means that the request was not authorized by the server due to invalid credentials. A realm is a parameter that specifies the scope of protection for a resource, such as a Splunk Observability Cloud endpoint.
An access token is a credential that grants access to a resource, such as a Splunk Observability Cloud API. If the realm or the access token is misconfigured, the request to install OpenTelemetry Collector will be rejected by the server with a 401 (UNAUTHORIZED) error message.
Option A is incorrect because a 403 (NOT ALLOWED) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 403 (NOT ALLOWED) error message means that the request was authorized by the server but not allowed due to insufficient permissions. Option B is incorrect because a 404 (NOT FOUND) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 404 (NOT FOUND) error message means that the request was not found by the server due to an invalid URL or resource. Option D is incorrect because a 503 (SERVICE UNREACHABLE) error message is not indicative that there is a misconfigured realm or access token when installing OpenTelemetry Collector. A 503 (SERVICE UNREACHABLE) error message means that the server was unable to handle the request due to temporary overload or maintenance.
NEW QUESTION # 23
A customer deals with a holiday rush of traffic during November each year, but does not want to be flooded with alerts when this happens. The increase in traffic is expected and consistent each year. Which detector condition should be used when creating a detector for this data?
- A. Historical Anomaly
- B. Calendar Window
- C. Static Threshold
- D. Outlier Detection
Answer: A
Explanation:
Explanation
historical anomaly is a detector condition that allows you to trigger an alert when a signal deviates from its historical pattern1. Historical anomaly uses machine learning to learn the normal behavior of a signal based on its past data, and then compares the current value of the signal with the expected value based on the learned pattern1. You can use historical anomaly to detect unusual changes in a signal that are not explained by seasonality, trends, or cycles1.
Historical anomaly is suitable for creating a detector for the customer's data, because it can account for the expected and consistent increase in traffic during November each year. Historical anomaly can learn that the traffic pattern has a seasonal component that peaks in November, and then adjust the expected value of the traffic accordingly1. This way, historical anomaly can avoid triggering alerts when the traffic increases in November, as this is not an anomaly, but rather a normal variation. However, historical anomaly can still trigger alerts when the traffic deviates from the historical pattern in other ways, such as if it drops significantly or spikes unexpectedly1.
NEW QUESTION # 24
Which of the following are correct ports for the specified components in the OpenTelemetry Collector?
- A. gRPC (6831), SignalFx (4317), Fluentd (9080)
- B. gRPC (4317), SignalFx (9080), Fluentd (8006)
- C. gRPC (4000), SignalFx (9943), Fluentd (6060)
- D. gRPC (4459), SignalFx (9166), Fluentd (8956)
Answer: B
Explanation:
Explanation
The correct answer is D. gRPC (4317), SignalFx (9080), Fluentd (8006).
According to the web search results, these are the default ports for the corresponding components in the OpenTelemetry Collector. You can verify this by looking at the table of exposed ports and endpoints in the first result1. You can also see the agent and gateway configuration files in the same result for more details.
1: https://docs.splunk.com/observability/gdi/opentelemetry/exposed-endpoints.html
NEW QUESTION # 25
The built-in Kubernetes Navigator includes which of the following?
- A. Map, Clusters, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail
- B. Map, Nodes, Workloads, Node Detail, Workload Detail, Group Detail, Container Detail
- C. Map, Nodes, Processors, Node Detail, Workload Detail, Pod Detail, Container Detail
- D. Map, Nodes, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail
Answer: D
Explanation:
The correct answer is D. Map, Nodes, Workloads, Node Detail, Workload Detail, Pod Detail, Container Detail.
The built-in Kubernetes Navigator is a feature of Splunk Observability Cloud that provides a comprehensive and intuitive way to monitor the performance and health of Kubernetes environments. It includes the following views:
Map: A graphical representation of the Kubernetes cluster topology, showing the relationships and dependencies among nodes, pods, containers, and services. You can use the map to quickly identify and troubleshoot issues in your cluster1 Nodes: A tabular view of all the nodes in your cluster, showing key metrics such as CPU utilization, memory usage, disk usage, and network traffic. You can use the nodes view to compare and analyze the performance of different nodes1 Workloads: A tabular view of all the workloads in your cluster, showing key metrics such as CPU utilization, memory usage, network traffic, and error rate. You can use the workloads view to compare and analyze the performance of different workloads, such as deployments, stateful sets, daemon sets, or jobs1 Node Detail: A detailed view of a specific node in your cluster, showing key metrics and charts for CPU utilization, memory usage, disk usage, network traffic, and pod count. You can also see the list of pods running on the node and their status. You can use the node detail view to drill down into the performance of a single node2 Workload Detail: A detailed view of a specific workload in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and pod count. You can also see the list of pods belonging to the workload and their status. You can use the workload detail view to drill down into the performance of a single workload2 Pod Detail: A detailed view of a specific pod in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and container count. You can also see the list of containers within the pod and their status. You can use the pod detail view to drill down into the performance of a single pod2 Container Detail: A detailed view of a specific container in your cluster, showing key metrics and charts for CPU utilization, memory usage, network traffic, error rate, and log events. You can use the container detail view to drill down into the performance of a single container2 To learn more about how to use Kubernetes Navigator in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html#Kubernetes-Navigator 2: https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html#Detail-pages 3: https://docs.splunk.com/observability/infrastructure/monitor/k8s-nav.html
NEW QUESTION # 26
With exceptions for transformations or timeshifts, at what resolution do detectors operate?
- A. The resolution of the chart
- B. Native resolution
- C. 10 seconds
- D. The resolution of the dashboard
Answer: B
Explanation:
According to the Splunk Observability Cloud documentation1, detectors operate at the native resolution of the metric or dimension that they monitor, with some exceptions for transformations or timeshifts. The native resolution is the frequency at which the data points are reported by the source. For example, if a metric is reported every 10 seconds, the detector will evaluate the metric every 10 seconds. The native resolution ensures that the detector uses the most granular and accurate data available for alerting.
NEW QUESTION # 27
What constitutes a single metrics time series (MTS)?
- A. A set of metrics that are ordered in series based on timestamp.
- B. A set of data points that all have the same metric name and list of dimensions.
- C. A set of data points that use different dimensions but the same metric name.
- D. A series of timestamps that all reflect the same metric.
Answer: B
Explanation:
Explanation
The correct answer is B. A set of data points that all have the same metric name and list of dimensions.
A metric time series (MTS) is a collection of data points that have the same metric and the same set of dimensions. For example, the following sets of data points are in three separate MTS:
MTS1: Gauge metric cpu.utilization, dimension "hostname": "host1" MTS2: Gauge metric cpu.utilization, dimension "hostname": "host2" MTS3: Gauge metric memory.usage, dimension "hostname": "host1" A metric is a numerical measurement that varies over time, such as CPU utilization or memory usage. A dimension is a key-value pair that provides additional information about the metric, such as the hostname or the location. A data point is a combination of a metric, a dimension, a value, and a timestamp1
NEW QUESTION # 28
Which of the following chart visualization types are unaffected by changing the time picker on a dashboard?
(select all that apply)
- A. Heatmap
- B. Single Value
- C. Line
- D. List
Answer: B,D
Explanation:
Explanation
The chart visualization types that are unaffected by changing the time picker on a dashboard are:
Single Value: A single value chart shows the current value of a metric or an expression. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart1 List: A list chart shows the values of a metric or an expression for each dimension value in a table format. It does not depend on the time range of the dashboard, but only on the data resolution and rollup function of the chart2 Therefore, the correct answer is A and D.
To learn more about how to use different chart visualization types in Splunk Observability Cloud, you can refer to this documentation3.
1: https://docs.splunk.com/Observability/gdi/metrics/charts.html#Single-value 2:
https://docs.splunk.com/Observability/gdi/metrics/charts.html#List 3:
https://docs.splunk.com/Observability/gdi/metrics/charts.html
NEW QUESTION # 29
What are the best practices for creating detectors? (select all that apply)
- A. Have a consistent value.
- B. Have a consistent type of measurement.
- C. View data at highest resolution.
- D. View detector in a chart.
Answer: A,B,C,D
Explanation:
Explanation
The best practices for creating detectors are:
View data at highest resolution. This helps to avoid missing important signals or patterns in the data that could indicate anomalies or issues1 Have a consistent value. This means that the metric or dimension used for detection should have a clear and stable meaning across different sources, contexts, and time periods. For example, avoid using metrics that are affected by changes in configuration, sampling, or aggregation2 View detector in a chart. This helps to visualize the data and the detector logic, as well as to identify any false positives or negatives. It also allows to adjust the detector parameters and thresholds based on the data distribution and behavior3 Have a consistent type of measurement. This means that the metric or dimension used for detection should have the same unit and scale across different sources, contexts, and time periods. For example, avoid mixing bytes and bits, or seconds and milliseconds.
1: https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 2:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors 3:
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#View-detector-in-a-chart :
https://docs.splunk.com/Observability/gdi/metrics/detectors.html#Best-practices-for-detectors
NEW QUESTION # 30
Which of the following is optional, but highly recommended to include in a datapoint?
- A. Metric type
- B. Timestamp
- C. Value
- D. Metric name
Answer: A
Explanation:
Explanation
The correct answer is D. Metric type.
A metric type is an optional, but highly recommended field that specifies the kind of measurement that a datapoint represents. For example, a metric type can be gauge, counter, cumulative counter, or histogram. A metric type helps Splunk Observability Cloud to interpret and display the data correctly1 To learn more about how to send metrics to Splunk Observability Cloud, you can refer to this documentation2.
1: https://docs.splunk.com/Observability/gdi/metrics/metrics.html#Metric-types 2:
https://docs.splunk.com/Observability/gdi/metrics/metrics.html
NEW QUESTION # 31
A customer has a very dynamic infrastructure. During every deployment, all existing instances are destroyed, and new ones are created Given this deployment model, how should a detector be created that will not send false notifications of instances being down?
- A. Check the Dynamic checkbox when creating the detector.
- B. Create the detector. Select Alert settings, then select Ephemeral Infrastructure and enter the expected lifetime of an instance.
- C. Create the detector. Select Alert settings, then select Auto-Clear Alerts and enter an appropriate time period.
- D. Check the Ephemeral checkbox when creating the detector.
Answer: B
Explanation:
Explanation
According to the web search results, ephemeral infrastructure is a term that describes instances that are auto-scaled up or down, or are brought up with new code versions and discarded or recycled when the next code version is deployed1. Splunk Observability Cloud has a feature that allows you to create detectors for ephemeral infrastructure without sending false notifications of instances being down2. To use this feature, you need to do the following steps:
Create the detector as usual, by selecting the metric or dimension that you want to monitor and alert on, and choosing the alert condition and severity level.
Select Alert settings, then select Ephemeral Infrastructure. This will enable a special mode for the detector that will automatically clear alerts for instances that are expected to be terminated.
Enter the expected lifetime of an instance in minutes. This is the maximum amount of time that an instance is expected to live before being replaced by a new one. For example, if your instances are replaced every hour, you can enter 60 minutes as the expected lifetime.
Save the detector and activate it.
With this feature, the detector will only trigger alerts when an instance stops reporting a metric unexpectedly, based on its expected lifetime. If an instance stops reporting a metric within its expected lifetime, the detector will assume that it was terminated on purpose and will not trigger an alert. Therefore, option B is correct.
NEW QUESTION # 32
What information is needed to create a detector?
- A. Alert Signal, Alert Condition, Alert Settings, Alert Message, Alert Recipients
- B. Alert Signal, Alert Criteria, Alert Settings, Alert Message, Alert Recipients
- C. Alert Status, Alert Criteria, Alert Settings, Alert Message, Alert Recipients
- D. Alert Status, Alert Condition, Alert Settings, Alert Meaning, Alert Recipients
Answer: A
Explanation:
According to the Splunk Observability Cloud documentation1, to create a detector, you need the following information:
Alert Signal: This is the metric or dimension that you want to monitor and alert on. You can select a signal from a chart or a dashboard, or enter a SignalFlow query to define the signal.
Alert Condition: This is the criteria that determines when an alert is triggered or cleared. You can choose from various built-in alert conditions, such as static threshold, dynamic threshold, outlier, missing data, and so on. You can also specify the severity level and the trigger sensitivity for each alert condition.
Alert Settings: This is the configuration that determines how the detector behaves and interacts with other detectors. You can set the detector name, description, resolution, run lag, max delay, and detector rules. You can also enable or disable the detector, and mute or unmute the alerts.
Alert Message: This is the text that appears in the alert notification and event feed. You can customize the alert message with variables, such as signal name, value, condition, severity, and so on. You can also use markdown formatting to enhance the message appearance.
Alert Recipients: This is the list of destinations where you want to send the alert notifications. You can choose from various channels, such as email, Slack, PagerDuty, webhook, and so on. You can also specify the notification frequency and suppression settings.
NEW QUESTION # 33
A DevOps engineer wants to determine if the latency their application experiences is growing fester after a new software release a week ago. They have already created two plot lines, A and B, that represent the current latency and the latency a week ago, respectively. How can the engineer use these two plot lines to determine the rate of change in latency?
- A. Create a temporary plot by dragging items A and B into the Analytics Explorer window.
- B. Create a temporary plot by clicking the Change% button in the upper-right corner of the plot showing lines A and B.
- C. Create a plot C using the formula (A-B) and add a scale:percent function to express the rate of change as a percentage.
- D. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
Answer: D
Explanation:
The correct answer is C. Create a plot C using the formula (A/B-l) and add a scale: 100 function to express the rate of change as a percentage.
To calculate the rate of change in latency, you need to compare the current latency (plot A) with the latency a week ago (plot B). One way to do this is to use the formula (A/B-l), which gives you the ratio of the current latency to the previous latency minus one. This ratio represents how much the current latency has increased or decreased relative to the previous latency. For example, if the current latency is 200 ms and the previous latency is 100 ms, then the ratio is (200/100-l) = 1, which means the current latency is 100% higher than the previous latency1 To express the rate of change as a percentage, you need to multiply the ratio by 100. You can do this by adding a scale: 100 function to the formula. This function scales the values of the plot by a factor of 100. For example, if the ratio is 1, then the scaled value is 100%2 To create a plot C using the formula (A/B-l) and add a scale: 100 function, you need to follow these steps:
Select plot A and plot B from the Metric Finder.
Click on Add Analytics and choose Formula from the list of functions.
In the Formula window, enter (A/B-l) as the formula and click Apply.
Click on Add Analytics again and choose Scale from the list of functions.
In the Scale window, enter 100 as the factor and click Apply.
You should see a new plot C that shows the rate of change in latency as a percentage.
To learn more about how to use formulas and scale functions in Splunk Observability Cloud, you can refer to these documentations34.
1: https://www.mathsisfun.com/numbers/percentage-change.html 2: https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale 3: https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Formula 4: https://docs.splunk.com/Observability/gdi/metrics/analytics.html#Scale
NEW QUESTION # 34
When creating a standalone detector, individual rules in it are labeled according to severity. Which of the choices below represents the possible severity levels that can be selected?
- A. Info, Warning, Minor, Major, and Critical.
- B. Debug, Warning, Minor, Major, and Critical.
- C. Info, Warning, Minor, Major, and Emergency.
- D. Info, Warning, Minor, Severe, and Critical.
Answer: A
Explanation:
Explanation
The correct answer is C. Info, Warning, Minor, Major, and Critical.
When creating a standalone detector, you can define one or more rules that specify the alert conditions and the severity level for each rule. The severity level indicates how urgent or important the alert is, and it can also affect the notification settings and the escalation policy for the alert1 Splunk Observability Cloud provides five predefined severity levels that you can choose from when creating a rule: Info, Warning, Minor, Major, and Critical. Each severity level has a different color and icon to help you identify the alert status at a glance. You can also customize the severity levels by changing their names, colors, or icons2 To learn more about how to create standalone detectors and use severity levels in Splunk Observability Cloud, you can refer to these documentations12.
1:
https://docs.splunk.com/Observability/alerts-detectors-notifications/detectors.html#Create-a-standalone-detector
2: https://docs.splunk.com/Observability/alerts-detectors-notifications/detector-options.html#Severity-levels
NEW QUESTION # 35
Which of the following can be configured when subscribing to a built-in detector?
- A. Alerts on team landing page.
- B. Alerts on a dashboard.
- C. Outbound notifications.
- D. Links to a chart.
Answer: C
Explanation:
Explanation
According to the web search results1, subscribing to a built-in detector is a way to receive alerts and notifications from Splunk Observability Cloud when certain criteria are met. A built-in detector is a detector that is automatically created and configured by Splunk Observability Cloud based on the data from your integrations, such as AWS, Kubernetes, or OpenTelemetry1. To subscribe to a built-in detector, you need to do the following steps:
Find the built-in detector that you want to subscribe to. You can use the metric finder or the dashboard groups to locate the built-in detectors that are relevant to your data sources1.
Hover over the built-in detector and click the Subscribe button. This will open a dialog box where you can configure your subscription settings1.
Choose an outbound notification channel from the drop-down menu. This is where you can specify how you want to receive the alert notifications from the built-in detector. You can choose from various channels, such as email, Slack, PagerDuty, webhook, and so on2. You can also create a new notification channel by clicking the + icon2.
Enter the notification details for the selected channel. This may include your email address, Slack channel name, PagerDuty service key, webhook URL, and so on2. You can also customize the notification message with variables and markdown formatting2.
Click Save. This will subscribe you to the built-in detector and send you alert notifications through the chosen channel when the detector triggers or clears an alert.
Therefore, option C is correct.
NEW QUESTION # 36
......
SPLK-4001 certification guide Q&A from Training Expert Pass4training: https://examsboost.pass4training.com/SPLK-4001-test-questions.html
