HPE7-A08 Training & Certification Get Latest HPE Aruba Networking Certified Professional Updated on Dec 25, 2025
Certification Training for HPE7-A08 Exam Dumps Test Engine
NEW QUESTION # 93
Which CLI command verifies if a physical link is experiencing excessive errors?
- A. show interfaces counters errors
- B. show interface state
- C. show error-log
- D. display port statistics
Answer: A
Explanation:
The show interfaces counters errors command displays CRC errors and dropped packets, helping identify faulty cables, hardware issues, or duplex mismatches.
NEW QUESTION # 94
Which method can be used to schedule automated configuration backups on Aruba switches?
Response:
- A. Enabling port mirroring
- B. TFTP or SCP scripting
- C. Configuring LLDP
- D. SNMP polling
Answer: B
NEW QUESTION # 95
Examine the attached diagram
Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10.
The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?
- A. Server 2 can successfully access the core layer via the keepalive link.
- B. Server 2 cannot access the core layer.
- C. Server 1 and Server 2 can communicate with each other via the core layer.
- D. Server 1 can access the core layer via both uplinks.
Answer: D
NEW QUESTION # 96
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
- B. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- C. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- D. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
Answer: B
Explanation:
AOX-CX switches do not support wildcard masks - only prefixes or subnet masks - when created ACEs.
Cisco: 255.0.255.0 = xx.123.xx.123
AOS-CX: 255.0.255.0 = 123.xx.123.xx
NEW QUESTION # 97
Which two Aruba CX switch series are best suited for large-scale data center networks? (Select two)
- A. Aruba CX 8400
- B. Aruba CX 4100i
- C. Aruba CX 6300
- D. Aruba CX 9300
Answer: A,D
Explanation:
The CX 8400 and CX 9300 offer high-performance switching, deep buffering, and advanced Layer 3 routing, making them ideal for scalable data center deployments.
NEW QUESTION # 98
Which CLI command displays SNMP agent configurations on an Aruba CX switch?
- A. show snmp agent
- B. show monitoring snmp
- C. display snmp settings
- D. show snmp status
Answer: D
Explanation:
The show snmp status command provides SNMP configuration details, ensuring proper setup for network monitoring using SNMP traps and polling.
NEW QUESTION # 99
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. Device fingerprinting is required for authentication
- B. The client-limit setting for port access needs to be changed
- C. 802.1X must be configured to work in fallback mode
- D. Device mode should be implemented
Answer: B
Explanation:
Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port. There are devices who support 802.1X and some no authentication at all, which leaves MAC auth as only possibility - or bypassing 802.1X (fallback).
NEW QUESTION # 100
Company A has an existing HPE Aruba Networking CX 8325 VSX.
It has acquired Company B and must merge its networks onto the same VSX switch configuration as Company A.
Both Company A and Company B share the same 10.100.100.1/21 subnet.
What is the correct order for creating a configuration allowing overlapping networks in the setup?
Answer:
Explanation:
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
NEW QUESTION # 101
What are valid NAE agent actions? (Select two)
- A. Generate an SNMP trap
- B. Create a new TAC case
- C. Start/stop a packet capture
- D. Generate a local system log
- E. Run a CLI command
Answer: D,E
NEW QUESTION # 102
Which feature enables Aruba CX switches to reduce manual configuration errors and enforce policies automatically?
- A. EVPN/VXLAN
- B. Virtual Switching Extension (VSX)
- C. Network Analytics Engine (NAE)
- D. Aruba NetEdit
Answer: D
Explanation:
NetEdit automates switch configuration management, ensuring policy enforcement, real-time validation, and reduced configuration errors.
NEW QUESTION # 103
Which CLI command removes a misconfigured default gateway from an Aruba CX switch?
- A. no ip default-gateway
- B. unset gateway
- C. clear ip route default
- D. delete default route
Answer: A
Explanation:
The no ip default-gateway command removes an incorrect gateway address, ensuring the correct gateway can be set for proper network routing.
NEW QUESTION # 104
Which CLI command displays the status of all LLDP neighbors detected by an Aruba CX switch?
- A. show link-layer neighbors
- B. show lldp neighbors
- C. show lldp topology
- D. display lldp status
Answer: B
Explanation:
The show lldp neighbors command provides information on directly connected devices, helping troubleshoot network topology and verify proper device connectivity.
NEW QUESTION # 105
Which Aruba networking solutions provide centralized switch management?
(Select two.)
Response:
- A. VLAN Trunking Protocol
- B. Aruba Central
- C. VSX
- D. NetEdit
Answer: B,D
NEW QUESTION # 106
Which actions should be taken before deploying a configuration change to Aruba switches?
(Select two.)
Response:
- A. Perform a rollback plan test
- B. Verify the configuration in a test environment
- C. Apply changes directly to all switches simultaneously
- D. Disable all redundant links before applying changes
Answer: A,B
NEW QUESTION # 107
Which CLI command configures a static route on an Aruba CX switch?
- A. set route static 192.168.1.1
- B. ip route 0.0.0.0/0 192.168.1.1
- C. static-route 192.168.1.0/24 via 192.168.1.1
- D. route add default 192.168.1.1
Answer: B
Explanation:
The ip route command manually defines a static route, ensuring packets are forwarded to a specified next-hop gateway without requiring a dynamic routing protocol.
NEW QUESTION # 108
An administrator is implementing a multi-area OSPF network. The network contains a backbone (area 0) and two other areas (1 and 2) connected to ABRs in the backbone The network has one routing switch connected to a service provider located in area 2 Which network design would minimize the number of routes in the routing switches' link state databases (LSDBs) while still allowing full connectivity?
- A. Area 0: Normal
Area 1: Totally stubby Area 2: Totally stubby - B. Area 0: Normal
Area 1: Totally stubby
Area 2: Totally not-so-stubby - C. Area 0: Not-so-stubby
Area 1: Totally not-so-stubby Area 2: Totally not-so-stubby - D. Area 0: Normal
Area 1: Totally not-so-stubby Area 2: Totally stubby
Answer: C
NEW QUESTION # 109
Which two security features prevent unauthorized MAC address spoofing on an Aruba CX switch? (Select two)
- A. MAC lockdown
- B. DHCP snooping
- C. BPDU Guard
- D. Dynamic ARP Inspection (DAI)
Answer: A,B
Explanation:
MAC lockdown restricts which MAC addresses can connect to a port, while DAI inspects ARP packets to prevent spoofing attacks that manipulate IP-to-MAC mappings.
NEW QUESTION # 110
Which CLI command removes an incorrectly assigned VLAN from an Aruba CX switch?
- A. unset vlan table
- B. clear vlan state
- C. delete vlan config
- D. no vlan
Answer: D
Explanation:
The no vlan command deletes a VLAN from the switch, ensuring network segmentation is properly configured.
NEW QUESTION # 111
Which CLI command displays the overall system uptime and CPU usage on an Aruba CX switch?
- A. show system uptime
- B. show system info
- C. show processes
- D. display cpu statistics
Answer: B
Explanation:
The show system info command displays CPU usage, memory consumption, and uptime, helping troubleshoot performance issues related to resource exhaustion.
NEW QUESTION # 112
Which CLI command removes an applied QoS policy from an interface?
- A. unset qos-profile qos-policy-1
- B. delete qos policy interface
- C. remove traffic-policy qos-policy-1
- D. no service-policy input qos-policy-1
Answer: D
Explanation:
The no service-policy input command detaches a QoS policy from an interface, stopping traffic classification and prioritization rules from affecting packet flows.
NEW QUESTION # 113
What is the most likely cause of an IP conflict on a network?
Response:
- A. Duplicate MAC addresses
- B. Spanning Tree Protocol failure
- C. Two devices using the same static IP address
- D. Incorrect subnet mask configuration
Answer: C
NEW QUESTION # 114
Which CLI command removes an incorrect VLAN from a switch port?
- A. delete vlan assignment
- B. unset interface vlan
- C. clear vlan port
- D. no switchport access vlan
Answer: D
Explanation:
The no switchport access vlan command removes a VLAN from a port, ensuring the correct VLAN can be reassigned to restore network connectivity.
NEW QUESTION # 115
Which benefits are provided by HPE Aruba's Virtual Switching Framework (VSF)?
(Select two.)
Response:
- A. Increased network security
- B. Simplified network management
- C. Faster convergence
- D. Improved wireless coverage
Answer: B,C
NEW QUESTION # 116
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. A local user role was deployed using a ClearPass solution
- B. 802.1X authentication occurred and downloadable user roles are deployed
- C. Only 802.1X authentication is configured on the port
- D. 802.1X authentication was successful, but MAC authentication is yet to start
Answer: B
Explanation:
The role 'aruba_contractor-3044-7' is the exact correct format for a DUR.
NEW QUESTION # 117
How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?
- A. Use the CLI of the AOS-CX switch
- B. Use the web interface of the AOS-CX switch
- C. Use the web interface of Aruba Central
- D. Use the web interface of the NetEdit server
Answer: B
NEW QUESTION # 118
......
HP HPE7-A08 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Step by Step Guide to Prepare for HPE7-A08 Exam: https://examsboost.pass4training.com/HPE7-A08-test-questions.html
