[2023] Practice with these C_IBP_2305 dumps Certification Sample Questions
Get Instant Access of 100% REAL C_IBP_2305 DUMP Pass Your Exam Easily
NEW QUESTION # 30
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.
- A. Sales Order Quantities (both historical and future open orders)
- B. Recommended Safety Stocks from Multistage Inventory Optimization
- C. Forecast Error CV Calculated by Manage Forecast Error Calculations app
- D. Future Consensus Forecasts and Lagged Forecast Snapshots
Answer: B,D
NEW QUESTION # 31
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Assign the compound master data type and its component master data types.
- B. Configure at most two input key figures on the same planning level in a key figure calculation.
- C. Configure at least one calculated key figure for the planning area.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: A,D
NEW QUESTION # 32
What are some of the capabilities of the Planner Workspaces app? Note: There are 2 correct answers to this question.
- A. It supports embedding analytic stories as a workspace component
- B. It supports simulating the effect of the changes
- C. It supports sharing with other users or user groups.
- D. It supports favorites created in SAP IBP, add-in for Microsoft Excel
Answer: A,D
NEW QUESTION # 33
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Identifiy intermittent demand for Forecast Error CV calculations
- B. Adjust for forecast bias in Forecast Error CV calculations
- C. Propagate forecast error to upstream locations in a supply chain network
- D. Adjust Safety Stock Recommendations based on forecast error CV input
Answer: B,D
NEW QUESTION # 34
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer only
- B. Supply optimizer and supply heuristics
- C. Finite and infinite heuristics
- D. Finite heuristics only
Answer: B
NEW QUESTION # 35
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks are imposed when modeling an attribute as a key figure.
- B. Filter blocks are imposed when modeling attribute transformations.
- C. Filter blocks are imposed when modeling cross-period calculations.
- D. Filter blocks can be visualized in the Key Figure Calculations app.
- E. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
Answer: A,B,E
NEW QUESTION # 36
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.
- A. Gating Factors
- B. Planning with Product Allocations
- C. Analyze Supply Usage
- D. Detailed Production Scheduling
Answer: A,C
NEW QUESTION # 37
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Reason code
- B. Modified date
- C. Scenario ID
- D. Attributes
- E. Key figure type
Answer: A,B,D
NEW QUESTION # 38
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- C. Number of fair share segments Additional tiering costs (default) Inventory days of supply
- D. Number of fair share segments Additional tiering costs (default) Maximum inventory
Answer: B
NEW QUESTION # 39
What function would you use to configure a year-to-date calculation?
- A. Rolling Aggregation
- B. Last Period Aggregation
- C. Cumulative Aggregation
- D. Dynamic Rolling Aggregation
Answer: C
NEW QUESTION # 40
How many different time levels can be selected within one planning view?
- A. Only time levels from the base planning level of selected key figures
- B. Only base time levels of the planning area
- C. All time levels available in the time profile
- D. All time levels available in the time profile, restricted by global configuration parameter
Answer: C
NEW QUESTION # 41
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- B. Splitting the values from detailed to aggregated level by using a copy operator
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level, based on the time profile attribute
Answer: A,C
NEW QUESTION # 42
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Incremental production values
- B. Adjusted production interactive values
- C. Capacity expansion with additional costs
- D. Production source validity at the start of seasonal peak
Answer: C
NEW QUESTION # 43
Which of the following are valid use cases for using the Realignment App?Note: There are 2 correct answers to this question.
- A. Changing customer sources and reassigning customers to new DCs
- B. Using the realignment run to identify obsolete data
- C. Merging two locations into a new location
- D. Removing outliers from the sales history of a reference product before transferring its sales to a new product
Answer: A,C
NEW QUESTION # 44
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The total number of attributes that can use subtotals in the planning view can be restricted.
- B. The total value can be added before or after the selected attribute.
- C. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- D. Only attribute-based totals can be added to the planning view.
Answer: A,B
NEW QUESTION # 45
What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.
- A. By Number of Items (Sorted Average)
- B. By Pareto Principle (Sorted and Cumulated %)
- C. By Number of Items (Sorted Values)
- D. By Pareto Principle (Sorted and Calculated Values)
Answer: C,D
NEW QUESTION # 46
You define fixing for a key figure.Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for manually editable key figures.
- C. Fixing is possible for a certain quantity of a key figure value.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: A,D
NEW QUESTION # 47
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- B. Merge analytics and alerts into a new planning area from any sample planning area.
- C. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- D. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
Answer: A
NEW QUESTION # 48
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Jobs in the Applications Jobs app
- B. Supply chain graph in Supply Chain Network app
- C. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: A,D
NEW QUESTION # 49
You are modeling a new product introduction.Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app?Note: There are 2 correct answers to this question.
- A. Enter the Phase-out Start Date and Phase-out End Date
- B. Enter the product family to which the new product belongs
- C. Copy the launch dimension from the reference product to the new product
- D. Create planning objects for new combinations in the app
Answer: C,D
NEW QUESTION # 50
Which features apply to quota violations modeled with the optimizer?
- A. Min and Max Quotas have to be the same as sourcing ratios.
- B. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
- C. Quotas can be modeled for sourcing location, production, and consensus demand.
- D. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
Answer: D
NEW QUESTION # 51
What is taken as an input for the demand sensing process?Note: There are 2 correct answers to this question.
- A. Open Sales Orders
- B. Forecast Accuracy measures
- C. Results of time series analysis
- D. Consensus Demand
Answer: A,D
NEW QUESTION # 52
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- B. A planning area with the copy operators assigned must be bundled in one collection.
- C. You should delete collections after they have been transported.
- D. A planning area with its time profile must be bundled in one collection.
Answer: B,D
NEW QUESTION # 53
......
Free Exam Files Downloaded Instantly: https://examsboost.pass4training.com/C_IBP_2305-test-questions.html
