100% Free D-PSC-DY-23 Exam Dumps to Pass Exam Easily from Pass4training [Q118-Q139]

Share

100% Free D-PSC-DY-23 Exam Dumps to Pass Exam Easily from Pass4training

Free D-PSC-DY-23 Exam Questions D-PSC-DY-23 Actual Free Exam Questions

NEW QUESTION # 118
A company has a Dell PowerScale cluster with Gen 6 nodes. Due to performance issues, they have added four H400 nodes and created a new node pool. The administrator wants to enable metadata read/write acceleration for the SSDs.
However, they are not able to do so.
What is the reason for this issue?

  • A. L3 cache is enabled on the new node pool and uses all SSDs
  • B. L3 cache is disabled on the new node pool; therefore, acceleration is not available
  • C. Only metadata read acceleration is supported with Gen 6 H400 nodes
  • D. Metadata read/write acceleration needs to be enabled in the CLI

Answer: A


NEW QUESTION # 119
An implementation engineer has just joined an EMC Isilon cluster to an Active Directory (AD). The System zone of the cluster is set to default settings.
Which AD group is automatically added to the Isilon cluster's users group?

  • A. Everyone
  • B. Domain Users
  • C. Local Users
  • D. Domain Admins

Answer: B


NEW QUESTION # 120
What is the minimum number of H400 nodes with OneFS 8.2.0 required to create a new Dell PowerScale cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A


NEW QUESTION # 121
What is the maximum object size supported by a Dell PowerScale OneFS S3 bucket?

  • A. 8 TB
  • B. 32 TB
  • C. 64 TB
  • D. 16 TB

Answer: D


NEW QUESTION # 122
Which feature provides secure file system multi-tenancy access for EMC Isilon clusters?

  • A. DNS zone
  • B. System zone
  • C. Access zones
  • D. Smart Connect zones

Answer: C


NEW QUESTION # 123
When performing a patch install during an upgrade in OneFS 8.2.0, how many patches can be installed as part of the upgrade process?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 124
What is the maximum number of active Swift connections on a 5-node Isilon cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 125
What accurately describes the behavior of an access token on an Isilon cluster?

  • A. One token is generated for every access zone.
  • B. Requires the use of external authentication providers.
  • C. Cannot contain both an SID and an UID.
  • D. Updated when the client accesses the cluster.

Answer: D


NEW QUESTION # 126
In a Dell EMC Isilon environment, which aggregation mode is considered "dynamic"?

  • A. Active/Passive Failover
  • B. LACP
  • C. Round Robin
  • D. FEC

Answer: B


NEW QUESTION # 127
If a company is required to comply with Governance and National Security standards, which Data Domain feature should be recommended?

  • A. Retention Lock Compliance
  • B. Extended Retention
  • C. Encryption
  • D. Retention Lock Governance

Answer: A


NEW QUESTION # 128
An Isilon storage administrator has created a 500 GB quota on a new directory called `/ifs/homedirs'.
The administrator then begins migrating files from a Linux server through NFS to the new directory.
The migration tool returns a "Disk quota exceeded" error and fails to complete after approximately 400 GB of files are copied to the Isilon cluster. However, the cluster is reporting 10 TB of unused capacity.
What is the most likely cause for this error?

  • A. Soft quotas have been exceeded
  • B. SmartPool tier capacity has been exceeded
  • C. Hard quota includes overhead
  • D. Only the root can exceed 80% of quota

Answer: C


NEW QUESTION # 129
You have been tasked with creating file pool policies for a customer as part of the configuration document. Three of the file pool policies are based on matching specific file extensions.
What file pool policy filter type should you select?

  • A. File location
  • B. User defined attributes
  • C. Filename
  • D. File type

Answer: C


NEW QUESTION # 130
In a Dell EMC Isilon environment, what is a characteristic of dynamic pools?

  • A. Must have the same number of IP addresses in the range as NIC ports in the pool
  • B. Can allocate more than one IP address per NIC port in the pool
  • C. Fails over the IP addresses in a pool to the node with the lowest LNN if a node fails
  • D. Forces the IP addresses to stay with the same NIC port, even if a node fails

Answer: B


NEW QUESTION # 131
What is one requirement to join multiple authentication sources through an access zone?

  • A. Must belong to all access zones
  • B. Must belong to only the joined access zone
  • C. Must only join AD domains in the same forest
  • D. Must use a common /ifs tree for all access zones

Answer: B


NEW QUESTION # 132
Which type of issues are resolved by enabling Source-Based Routing on an Isilon cluster?

  • A. SmartConnect load balance.
  • B. Asymmetric routing.
  • C. TCP retransmission.
  • D. IP address space depletion.

Answer: B


NEW QUESTION # 133
What type of identity information is stored in an access token?

  • A. Kerberos tokens
  • B. Secondary identities only
  • C. Primary identities only
  • D. Primary and secondary identities

Answer: D


NEW QUESTION # 134
What is a benefit of using NANON?

  • A. Increased bandwidth inside the cluster and GbE links
  • B. Increased capacity and aggregated cache
  • C. Increased frontend I/O ports and aggregated cache
  • D. Increased number of connected frontend network ports

Answer: B


NEW QUESTION # 135
In a Dell EMC Isilon environment, what happens when executing a failover revert?

  • A. Redirects clients to the source cluster
  • B. Undoes a failback job in progress
  • C. Undoes a failover job in progress
  • D. Redirects clients to the target cluster

Answer: C


NEW QUESTION # 136
In a Dell EMC Isilon environment, which SyncIQ option can be used to copy the SmartLink file to another cluster that supports CloudPools?

  • A. Force
  • B. Deny
  • C. Stub
  • D. Allow

Answer: A


NEW QUESTION # 137
A customer has an existing cluster with 10 S200 nodes in a single node pool, and 15 NL400 nodes in a second node pool. They need to add capacity to their S200 node pool. The sales team has indicated they should purchase an S210 node to obtain the additional capacity.
What is required to add the new node to the existing node pool?

  • A. S200 node pool must be modified to use L3 cache
  • B. S210 node must have the identical memory capacity as the S200s
  • C. S200 nodes must be upgraded to the same firmware as the S210s
  • D. S210 node must have the same number and capacity of HDDs and SSDs as the S200s

Answer: D


NEW QUESTION # 138
Which type of node is designed for files that are accessed infrequently, or stored for archival purposes?

  • A. Backup Accelerator
  • B. NL-Series
  • C. S-Series
  • D. X-Series

Answer: C


NEW QUESTION # 139
......

Latest 100% Passing Guarantee - Brilliant D-PSC-DY-23 Exam Questions PDF: https://examsboost.pass4training.com/D-PSC-DY-23-test-questions.html